How to maintain safety in Concrete Construction
In concrete construction, safe is the most vital point to be considered. Described below, the importance of safety in construction.
If precautions are taken, most of the accidents can be avoided. The Accidents occur because of negligence and lacking of proper thinking over your activities. There should be proper planning for safety. For safety purpose, you have to maintain the following list of things.
Fresh concrete is the source of eye injuries and skin burns. So, it is suggested to wear clothes ((a long-sleeved shirt, rubber boots, and rubber gloves) which safeguard you from injuries and skin burns. Protection should also be taken for eyes to abstain from having fresh concrete on your skin or in your eyes. If fresh concrete touches your skin, rinse it with clean water.
Finishers must always dress with long pants, work boots, knee pads as well as apply knee boards and gloves. They should instantly take out clothing that is drenched with wet concrete.
If the workers apply various personal protection equipments like (PPEs–hard hats, gloves, boots, eye protection, fall protection, respirators etc.) they can get rid of the short-term and long-term influences of construction site conditions.
Ear plugs should be utilized if the noise level is established where it is required to lift your voice to talk with the person working beside you. It doesn’t take much revelation to noise to impair your hearing forever.
While cutting, grinding, or chipping hardened concrete as well blending epoxy or grout, the construction workers have to breathe in dirt, dust, chips, or mist. To avoid this situation, dust masks or respirators must be worn. It is suggested to ask for proper training in the selection and applying a proper respirator. Besides, apply wet methods or “dustless” vacuum tools.
The construction workers often get injured with ladders and stairways. Employers must provide proper training to the employees through a skilled person in the nature of fall hazards; the exact method for erecting, maintaining, and disassembling fall protection systems; appropriate construction, application, placement, and care in dealing with stairways and ladders as well as the extreme intended load-carrying capability of ladders.